Aumüller folding arm drive FTA 600 GF

FLAP LEVER ACTUATOR - FTA600 GF S12 24V DC

VARIANT: GF - with slide rail for safe opening / closing of outward opening side hung sashes to 90°

Folding lever actuators from AUMÜLLER consist of an attractive, rectangular aluminum housing and a lever arm mounted on the side. The lever arm is approximately as long as the housing. When closed, it rests against the housing. Its opening angle is approx. 93°. The opening time is approx. 45 seconds. The microprocessor-controlled switch-off electronics and the motor gear unit are housed in the actuator housing.

Thanks to the integrated microprocessor and travel detection system, the main drive parameters, such as opening angle, speed, force, synchronous operation or sequential operations, can be programmed for specific objects. Soft start and soft stop protect the sash and mounting elements from premature wear. The integrated contact can be programmed for feedback or signal forwarding.

The flap lever drives were developed for installation on secondary closing edges of side-hung windows. However, they are also used on doors that are opened automatically in the event of a fire to allow fresh air to flow in, but can still be operated freely via the handle in normal operation. The opening angle of the side-hung sashes or doors is determined by the distance between the pivot points of the lever arm and the hinges. When used on doors as a secondary opening, the potential-free contact in the window drive is used to activate an electric door opener or a deadbolt lock.

Various installation-friendly accessories are available for convenient mounting.

Area of application:

You can use AUMÜLLER flap lever actuators in SHEV systems and for natural ventilation via automated windows, mainly in facades.

Due to their slim design, they protrude only slightly into the room. They achieve an opening angle of approx. 90° in about 45 seconds.

The window openers are mounted resting on the blind or casement frame of the secondary closing edges.

They are used for inward or outward opening side-hung windows. However, they can also be mounted on doors that open automatically in the event of a fire to allow fresh air to flow in and can be operated freely via the handle in normal operation.

Thanks to microprocessor-controlled load-break electronics, synchronous operation in drive systems or sequential control with interlocking drives is possible without additional modules, as is object-specific programming.

Window and facade manufacturers are enthusiastic users of folding lever drives.

You receive the drive without mounting material (available separately - see under "Accessories").