Delivery time 12 - 15 Working days
Important info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Hinged lever actuator for supply air systems for mounting on doors
For ventilation or creation of a secondary flow opening on rectangular, vertically installed inward and outward opening top-hung, bottom-hung, side-hung and skylight windows and doors.
On doors, both hinge side and counter hinge side installation must be ensured with free access.
Installation is carried out with the lever arm resting freely.
To increase the comfort of access, the combination with GEZE door closers, GEZE motor lock MLS, GEZE escape door strike and GEZE RWS must be ensured and the use on escape doors must be guaranteed.
To increase the service life, a high resistance to overpressure in the closing direction of F>1000N must be maintained.
It must be possible to adjust the opening angle individually.
The operator must have a soft start and a soft stop, as well as an integrated door bolt contact (max. 42 V, 0.5A).
The possibility of using the drive for operating double-leaf doors with integrated sequence control by means of actuation delay must be ensured.
Product features
- 90° door opening in less than 60 seconds
- Powerful operator with high torque
- Connection cable easily replaceable by means of plug
- Integrated signalling contact for door opener control or feedback signals
- Door remains freely accessible due to the free-lying operation of the lever by means of a pressure roller
Areas of application
- Use in supply air systems where large opening angles are required
- Single and double-leaf RWA supply air doors
- Mounting on the hinge or opposite hinge side
Product data table
- Lever arm free-hanging with roller
- Depth 40 mm
- Current consumption 1.4 A
- Length of connection cable between lock and control unit (max.) 5 m
- Cable dimension 0.5 mm²
- Temperature range -5 °C 75 °C
- Protection class IP32 III
- End position switch-off extended Internal travel sensor
- End position switch-off retracted Internal travel sensor
- Overload cut-off Yes
- Rated voltage: 24 V DC
- Quiescent current consumption: approx. 40 mA
- Switch-off current: 1.4 A
- Duty cycle: 30% ED
- Opening angle at actuator: 93
- Opening force: 600 N
- Running time: approx. 40 s
- Connection cable: 5 m long 5x0.5 mm², FRNC-LSIHSI FE 90
- Protection class: IP 32
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Design : | Folding arm drive |
| Color: | silver EV1 |
| Scope of delivery: | Folding lever drive without brackets |
| Speed: | ca. 40 s |
Scope of delivery
Folding lever drive without brackets
Download Anschlussplan GEZE RWA K 600 
