Product finder
Step by step to the right product

>> To our product consultants

Printable checklists
Send in and receive offer

>> To the checklists

SIMON PROtec Klapparm² Drehflügel PA-KL²-DF-50/140deg

SIMON PROtec folding arm² swing door PA-KL²-DF-50/140deg

24V
12638
M2 2024

Delivery time 9 - 12 Working days
Important info about the delivery time specification

€723.52 *

incl. VAT plus shipping costs

Leave your email address and stay informed about this article.

as soon as the item is back in stock
as soon as the item drops in price
as soon as the item is available as a special offer
SIMON PROtec Folding arm² side-hung sash PA-KL²-DF-50/140deg The PA-KL²-DF hinged arm² drive... more

SIMON PROtec Folding arm² side-hung sash PA-KL²-DF-50/140deg

The PA-KL²-DF hinged arm² drive unit is an extremely powerful drive unit for the electric motor-driven opening and closing of bottom-hung, top-hung and side-hung sashes. It is suitable for use on inward and outward closing elements. The drive is mounted on the secondary closing edges and the power transmission is achieved via a running rail of various lengths.

The PA-KL²-DF drive can be used very flexibly with regard to the installation situation and direction of rotation. Depending on the type of installation, opening widths of up to 140° and thus a fast smoke extraction and ventilation are possible in case of fire. The PA-KL²-DF swing door actuator is tested and certified according to DIN EN 12101-2 for use in a natural smoke and heat exhaust ventilation system and can also be used for controlled natural ventilation (KNL).

The PA-KL²-DF swing door actuator has special kinematics and the high performance gearbox (> 20,000 load cycles) in combination with the stainless steel lever arm is very resistant. With apush and pull force of 500 N and the small installation dimension, this automatic opener is ideal for projects with a high demand on functionality and design.

The connection is made via the SICO-PLUG connector. This includes the SICO BUS programming interface, via which parameters such as opening stroke and force can also be parameterized directly on site and further status messages can be read out. The PA-KL²-DF swing door actuator can be networked with SHEV control centers and the building management system for remote operation.

In both end positions OPEN/CLOSED, the actuator also offers a potential-free contact. Operating sequence controls and start-up delay are freely adjustable. Due to the freely adjustable start-up delay , the swing door folding arm isideal for the automated opening of forend sashes. The PA-KL²-DF swing door operator can also be used in combination with an additional locking device.

Your advantages at a glance

  • suitable for bottom-hung, top-hung and side-hung sashes
  • versatile use on secondary closing edges
  • Automation of inward and outward opening elements possible
  • Opening angle 140
  • large ventilation cross-section
  • low operating costs
  • programmable via software interface

Technical data

  • Input voltage 24 V DC
  • Rated current 1.5 A
  • Input voltage range - 15 % / + 15 %
  • Residual ripple 500 mV
  • Opening angle 140 °
  • Compressive force 500 N
  • Tensile force 500 N
  • Nominal locking force 700 N
  • Cut-off Integrated load cut-off with microprocessor
  • Running speed 2.8 °/s
  • Protection class IP54, IP65
  • Duty cycle 30
  • Mounting type surface mounted
  • Weight 4.10 kg
  • Housing Aluminum profile housing E6 / EV1 anodized
  • Housing type Aluminum
  • Color RAL & DB colors
  • Housing length 568 mm
  • Housing width 58 mm
  • Housing height 118 mm
  • Protection class III
  • Connection cable SICO PLUG connection. Exclusive connection cable / set.
  • Nominal operating temperature 20 °C
  • Ambient temperature range 0 °C - 75 °C
  • Actuator without mounting brackets, without connection cable, with 1x SICO-PLUG plug set

Technical advice

+49 9282 48731-15
technik@bsc-technology.de

Fast delivery

... of goods in stock. Orders placed before 14:00 are usually shipped the same day.

Questions about the article

to the inquiry form

Technical data more
Design : Folding arm drive
Voltage range: 24V DC
Thrust: 500N
Scope of delivery: Drive without mounting brackets, without connection cable, with 1x SICO-PLUG plug set
Housing: Aluminium
Current / Power: 1,5A
Tensile force: 500N
Read, write and discuss reviews... more
Customer reviews for "SIMON PROtec folding arm² swing door PA-KL²-DF-50/140deg"
Write rating
Reviews will be activated after verification.

The fields marked with * are required.

Last viewed