Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
The linear actuator EA-L 500/xxx-02 has a special stability . The motor of the actuator is housed in a special aluminum tube with an integrated multifunctional groove. This enables versatile and flexible mounting technology and almost invisible routing of the connecting cable .
Monitored current consumption and overload protection
The push rod is extended and retracted via the internal spindle. The actuator has a force of 500 N in the push direction . Integrated in the actuator is an electronic load cut-off which monitors the current consumption. In case of overload, the load cut-off switches off the actuator and the respective potential is switched from "S" to the follow-up contact "F", i.e. in OPEN "+" and in CLOSE "-".
Please order brackets separately.
Your advantages at a glance
- Maximum force despite small diameter
- Invisible routing of the connection cable
- Flexible mounting technology
- Integrated load disconnection
- Force of 500 N
- Flexible bracket sets
Technical data
- Input voltage 24 V DC
- Rated current 0.95 A
- Input voltage range - 15 % / + 15 %
- Compressive force 500 N
- Tensile force 500 N
- Rated locking force 600 N
- Cut-off integrated electronic load cut-off
- Running speed 8.4 mm/s
- Protection class IP54
- Duty cycle 30
- Mounting type surface-mounted
- Housing Continuous aluminum profile tube, anodized E6/EV1 with integrated mounting for flexible bracket system
- Housing type Aluminum
- Protection class III
- Connection cable Silicone cable 3 x 0.75 mm², light gray The length of the connection cable depends on the stroke length of the linear actuator: up to 500 mm stroke 2,000 mm, from 750 mm stroke 3,500 mm
- Nominal operating temperature 20 °C
- Ambient temperature range -5 °C - 75 °C
- Drive without mountings
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Made in : | Germany |
| Application : | For bottom-hung windows (without restriction to 15cm), Light domes, Rotating window, Tilt window, Top hung window |
| Limit switch Open - Close : | Integrated electronic load disconnection and potential advance circuit "F", Electronic end position switch-off |
| Connection line : | Silicone cable 3 x 0.75 mm² |
| Modell : | EA-L |
| RWA suitable : | Ja |
| Voltage : | 24 V DC |
| Design : | Spindle drive |
| Signaling contact : | No |
| Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
| Stroke length can be shortened : | No |
| Protection class : | IP 54 |
| Ambient temperature : | - 5° to + 75° C |
| Color: | Silver anodized |
| Voltage range: | 24 V DC (- 10 % / + 25 %), ripple < 500 mV |
| Stroke length: | 300mm |
| Thrust: | 500N |
| Scope of delivery: | Drive without brackets |
| Dimensions: | Length: 336 mm + stroke + 21 mm (cable gland) |
| Housing: | Aluminium |
| Speed: | 8,4mm/s |
| Current / Power: | 1,0A |
| Tensile force: | 500N |
Scope of delivery
Drive without brackets
Download Datenblatt EA-L (DE) 
