Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Advantages at a glance
The WRS-S detects wind speed and detects precipitation. Wind and rain alarm are issued via outputs and indicated by LEDs on the device board. The wind limit value is set via DIP switches.
The wind-rain sensor is suitable for connection to all D+H SHEV and ventilation control panels.
- Wind measurement: The wind force measurement is carried out electronically and thus noiselessly and reliably, even in case of hail, snow and
- Minus temperatures. Air turbulence and rising winds in the area of the weather station are also recorded
- Setting of a wind limit value via DIP switch inside the housing
- Output for wind alarm, additional wind alarm LED on the board. Changeover contact can be used as normally open or normally closed contact
- can be used
- In the event of a wind sensor fault, the wind alarm becomes active and the power LED in the housing flashes. Fault is also triggered after 48 hours without a change in the wind reading (failure monitoring)
- Heated precipitation sensor (1.2 watts): no false measurement in case of dew or fog, quick drying after end of precipitation
- Output for rain alarm, additional rain alarm LED on board. Changeover contact can be used as normally open or normally closed contact
- can be used
- Wind/rain contact can be used as potential free changeover contact. Only the jumpers have to be removed from the PCB.
- Replaces the WRG 82. Connection diagram remains unchanged!
- Wind switching threshold adjustable via DIP switch from 1 m/s to 30 m/s
- Rain signal is stored for approx. 5 minutes (rain holding time)
- Wind signal is stored for approx. 5 minutes
- Heated sensor surface
- Incl. mast and wall mounting
- Input voltage: 24 V DC
- Protection class: IP 44
- Temperature range: -30 °C ... +50 °C
- Housing: plastic
- W x H x D: 96 x 77 x 118 mm
- Weight: 0,18 kg
|Protection class :||IP 44|
|Voltage :||24 V DC|
|Scope of delivery:||Wind-rain sensor incl. mast and wall mounting|
|Dimensions:||96 x 77 x 118 mm|
Scope of delivery
Wind-rain sensor incl. mast and wall mounting