Aumüller locking drive FVM2
Leave your email address and stay informed about this article.
- Other type designation: Eltral VA25
Locking drive FVM
AUMÜLLER FVM locking drives have a drive force of 600 N with a breakout force of 1000 N. The filigree stainless steel housings are ideal for profile-integrated mounting. The driver accesses the proven window fitting. Window bolt drives are used for secure locking and unlocking of all types of windows in combination with various window drives.
Highlights of the FVM
Follow-up control with various drives without external modules
Housing made of stainless steel
suitable for profile-integrated and overlying mounting
robust, corrosion-resistant design
high all-round sealing of the wings by operation of the proven window fitting via an additional closing roller
Lock plate can be mounted at the top or bottom and rotated through 180 °
Locking position in right or left end position, adjustable via DIP switch
Locking stroke 17 or 36 mm, adjustable via DIP switch
manual emergency release
concealed cable clamps below the end caps
concealed DIP switches for setting the direction of movement and stroke length
Programming special functions
M-COM suitable for automatic configuration of synchronous operation and sequential control with interlocking drives (S3 / S12 SW V2) in drive systems
Maximum composite size 4 drive units plus 2 locks
Assembly of the FVM
You can use AUMÜLLER FVM locking drives in SHE systems and for natural ventilation via automated windows in facades.
The installation of the window bolt drives is concealed in profile but also resting on the frame of the main or secondary closing edge. For profile-integrated mounting, the locking takes place via an additional closing roller of the proven window fitting.
This preserves the features tested in accordance with EN14351-1, such as watertightness and window joint permeability.
FVM window locking drives are used for secure locking and unlocking of all common sash types, regardless of the opening direction.
More information about the drive can be found under the tab "Downloads".
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Made in : | Germany |
Stroke length can be shortened : | No |
Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
Signaling contact : | No |
Application : | Rotating window, Tilt window, Top hung window |
Voltage : | 24 V DC |
RWA suitable : | Ja |
Protection class : | IP 32 |
Design : | Locking drive |
Ambient temperature : | -5 °C ... + 75 °C |
Connection line : | Halogenfrei, grade 3 x 0.50 mm2, - 3 m |
Modell : | FVM |
Limit switch Open - Close : | FVM - M-COM compatible integrated load disconnection electronics and sequence control with drives in S3 / S12 version |
Color: | Silber eloxiert |
Voltage range: | 24V DC (± 20 %), max. 2 Vpp |
Thrust: | 600N |
Scope of delivery: | Antrieb |
Dimensions: | 473mmx25x25mm |
Housing: | Edelstahl |
Speed: | 1,9mm/s |
Current / Power: | 0,4 A |
Tensile force: | --- |
Scope of delivery
Antrieb