Delivery time 21 - 24 Working days
Important info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
The wind - rain automatic consists of a combined sensor with integrated control unit. It is used for the automatic control of windows, dome lights or awnings. The control electronics has a potential-free changeover contact as output. The switching point is factory set, as an option switching point adjustable.
Are used for control, regulation in building services and building automation. Due to the change in conductivity of the rain sensor during precipitation, the switching stage of the electronics is excited and the power contact is actuated. The switch back occurs after drying of the rain sensor by the built-in heater.
Technical data:
- Wind - rain control
- Output 1 potential-free changeover contact
- Switching capacity: 5 A max. 230 VAC
- Switching point: adjustable from 0...35 m/s
- Switch-on delay fixed at 6 sec.
- Switch-off delay fixed at 5 min.
- Dimensions: 80x240x200 mm
- Color: white/grey
- Weight: 1,5 kg
- Connection: clamp connection
- Measuring range: 0...35 m/s
- Start-up: at 0.4 m/s
- Max. Load: 50 m/s
- Operating voltage: 24V AC/DC
Mounting:
Mounting is done with the attached wall bracket. Various mounting brackets, pole brackets or poles are also available at extra cost.
Maintenance:
Depending on environmental influences and degree of contamination, clean the sensor, otherwise a proper function is not guaranteed. Do not use aggressive cleaners to avoid damaging the sensor surface.
When using these devices, the VDE regulations as well as the regulations of the professional associations for work on electrical devices and systems must be observed.
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Scope of delivery: | Sensor in plastic housing, mounting bracket and pole mount for pole diameter = 50mm |
Scope of delivery
Sensor in plastic housing, mounting bracket and pole mount for pole diameter = 50mm