BSC Wind-Rain Monitor WR24V1-T with separate outputs - 24V

Wind - rain monitor  switching
Awning - dome light control
with 2 separate outputs
output 2 potential-free changeover contacts
Operating voltage 24V AC/DC

These compact weather stations are complete weather stations with all necessary sensors, transmitters and brackets. The transmitters are integrated in the sensor housing, so that the measured values can be taken directly at the sensor. This facilitates mounting and saves time during installation.

A customized composition of the weather station is also possible, please ask us for it, specifying the required measured variables.

The wind - rain automatic consists of a combined sensor with integrated control unit. It is used for automatic control of windows, dome lights or awnings. The control electronics has two separate potential-free changeover contacts as output. The switching point is adjustable from 0...35 m/s in the sensor. Wind - rain monitors are used for control, regulation in building services and building automation. The change in conductivity of the rain sensor at the onset of precipitation triggers the switching stage of the electronics and actuates the power contact. The switch back takes place after drying of the rain sensor by the built-in heating. The wind monitor switches after exceeding the set switching threshold, the switch back occurs after uninterrupted undercutting of the switching threshold for 5 min.

Technical data:

• Switching capacity: 5 A max. 230 VAC
• Switch-on delay: wind fixed at 6 sec., rain immediately
• Switch-off delay: wind fixed at 5 min., rain after drying off
• Dimensions: 80x240x200 mm
• Color: white/grey                     
• Weight: 1,5 kg
• Connection cable: 3 m or cable gland
• Measuring range: 0...35 m/s
• Switching point: adjustable 0...35 m/s
• Output: 2 separate potential-free change-over contacts
• Start-up: at 0.4 m/s
• Max. Load: 50 m/s
• Operating voltage: 24V AC/DC 2,5 VA (also available in 230 V)