Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
The wind - rain automatic consists of a combined sensor with integrated control unit. It is used for the automatic control of windows, dome lights or awnings.
The control electronics has two potential-free changeover contacts as output. The switching point for the wind is adjustable.
Are used for control, regulation in building services and building automation.
By the conductivity change of the rain sensor with beginning precipitation, the switching stage of the electronics is steered and the power contact is actuated. The switch back takes place after drying of the rain sensor by the built-in heater.
Technical data:
- Wind - rain control
- Output 2 potential-free changeover contact
- Switching capacity: 5 A max. 230 VAC
- Switching point: adjustable 0...35 m/s
- Switch-on delay fixed at 6 sec.
- Switch-off delay fixed at 5 min.
- Dimensions: 80x240x200 mm
- Color: white/grey
- Weight: 1,5 kg
- Connection cable: Cable entry
- Measuring range: 0...35 m/s
- Start-up: at 0.4 m/s
- Max. Load: 50 m/s
- Operating voltage: 24V
Mounting:
Mounting is done with the attached wall bracket. Various mounting brackets, pole brackets or Mounting brackets, pole brackets or poles are available at an additional cost.
Maintenance:
Depending on the environmental influences and the degree of soiling, clean the sensor, otherwise a proper function cannot be guaranteed function is not guaranteed. Do not use aggressive cleaners to avoid damaging the sensor surface not to damage the sensor surface.
When using these devices, the VDE regulations and the regulations of the professional associations for work on electrical devices and systems must be observed.
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Scope of delivery: | Sensor in plastic housing, mounting bracket and pole mount for pole diameter = 50mm |
Scope of delivery
Sensor in plastic housing, mounting bracket and pole mount for pole diameter = 50mm