Aumüller locking drive FVB3 16
Leave your email address and stay informed about this article.
Locking actuators FVB
AUMÜLLER FVB locking drives have a drive force of 600 N. The shapely, slim aluminum housings lie flat against the window profile. The driver accesses the system-specific proven window fitting. Window bolt drives are used for secure locking and unlocking of all inward-opening windows in combination with various window drives.
Highlights of the FVB
Sequence control with various drives
Housing made of natural anodised aluminum, optionally in other RAL colors
suitable for surface mounting
robust, corrosion-resistant design
high all-round sealing of the wings by operation of the proven window fitting via an additional closing roller
easy to install due to concealed holes underneath inclined end caps and therefore invisible screws
concealed cable clamps below the end caps
concealed DIP switches for setting the direction of travel
Assembly of the FVB
You can use FVB locking drives from AUMÜLLER in RWA systems and for natural ventilation via automated windows in facades.
The installation of the window bolt drives takes place resting on the frame of the main or secondary closing edge.
The locking takes place via an additional closing roller of the proven window fitting. This preserves the features tested in accordance with EN14351-1, such as watertightness and window joint permeability.
FVB window latch drives are used for secure locking and unlocking of all inward-opening wing types.
FVB3 - integrated load shutdown electronics S3 and sequential control for RWA (Solo) fittings with PL6 S1 / PL10 S1 actuators (IA = 0.8 A)
Driver length = 19mm
More information about the drive can be found under the tab "Downloads".
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Made in : | Germany |
Stroke length can be shortened : | No |
Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
Signaling contact : | No |
Application : | Rotating window, Tilt window, Top hung window |
Voltage : | 24 V DC |
RWA suitable : | Ja |
Protection class : | IP 32 |
Design : | Locking drive |
Connection line : | Halogen-free, gray 2 x 0.75 mm², ~ 3 m |
Ambient temperature : | -5 °C ... + 75 °C |
Modell : | FVB |
Limit switch Open - Close : | Integrated load disconnection electronics S3 and sequence control for SHEV (solo) fittings with actuators PL6 S1 / PL10 S1 (IA = 0.8 A) |
Color: | Silber eloxiert |
Voltage range: | 24V DC (± 20 %), max. 2 Vpp |
Thrust: | 600N |
Scope of delivery: | Antrieb |
Dimensions: | 420mmx35x35mm |
Housing: | Aluminium |
Speed: | 5mm/s |
Housing length: | 420mm |
Current / Power: | 0,6 A |
Tensile force: | --- |
Scope of delivery
Antrieb