Spindle drives, sometimes also called lifting spindle motors, push out a push rod in the longitudinal direction of the drive by...
Chain drives push a back-stiff chain out of the housing at a 90° angle. Back stiff means that the chain can only bend in one direction. For this...
In rack drives, a gear motor mounted on the side pushes a steel rack out or in via a pinion. The rack is guided in a tube. The...
Pneumatic cylinders are often used in SHEV systems. They do not require an electrical connection, but are operated with CO2 (up to 60bar...
Steel cylinders filled with CO2 (carbon dioxide) are used in local
Alarm boxes, often also called emergency release stations or CO2 emergency release boxes, are mounted at eye level in the area of access points and are...
Pushbutton valves are used when pneumatically operated SHEV systems are not only to be opened with CO2 in case of fire, but also ventilation...
Thermal releases, often called thermal initiators or TAGs, are used to trigger a smoke and heat exhaust ventilator (SHEV) locally in the...
Compressed gas generators are pyrotechnic elements and are used for remote triggering of thermal tripping devices. When a...
Quick exhaust valves are used to vent pressurized systems more quickly and thus allow cylinders to run faster.
Check valves allow the medium (CO2, compressed air, oil, water, ...) to flow through in one direction only.
In this category you will find useful accessories for the maintenance of SHEV systems. For example, you can use an adapter to operate...
Here you will find various connection fittings for our pneumatic cylinders. Common connection tube diameters are 4, 6, 8mm. Please note...
Wind/rain detectors ensure that windows or skylights close when it rains or storms. In this category we have listed the most common...
This category deals with sensors that are often used in weather stations or special controllers. The measured values are output, for example,...
Load cut-offs are electronic modules that ensure that drives switch off correctly when they are blocked or have...
We are happy to support you in finding suitable solutions for your requirements and wishes. Functionality, safety, comfort and design are important aspects. Benefit from our years of experience - we look after you from the initial idea to...
Our buying guide will probably help you find the right set faster. We show you what you have to pay attention to and...
Our buying guide will probably help you find the right set faster. We show you what you have to...
Our buying guide will probably help you find the right set faster. We show you what you have to pay attention to and which...
B-goods are as-new demonstration units, samples and exhibition items as well as customer returns.
Product finder Step by step to the right product
>> To our product consultants
Telephone consultation: Head office: 09282 48731-0 Technology: 09282 48731-15 Accounting: 09282 48731-16
Email support Headquarters: info@bsc-technology.de Technology: technik@bsc-technology.de Accounting: buchhaltung@bsc-technology.de
>> To the contact form
Printable checklists Send in and receive offer
>> To the checklists
For operating 24V DC drives (max. 1A) at 230V AC
Ready to ship today, Delivery time appr. 1-3 workdaysImportant info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Used together with one or more ±24V DC drives with a total power of 1A, and a ventilation pushbutton e.g. WSK 100 1161 or WSK 102. The interface has one phase for opening the window and one phase for closing the window. The interface is mounted on the wall. No special tools are needed for mounting. The 1.3 meter long 3-wire power cable is connected to the 230V mains via a changeover switch.
The product can also be used as a successor for the WLC 100 controller, which is no longer available.
Primary voltage: 230V AC, ±10%, 50/60Hz, 50VA Secondary voltage: ±24V DC Total power: Max. 1A Size: 160 x 29 x 42mm (W x H x D) Color: Grey (RAL 7004) Scope of delivery: Interface with 2m mains cable as well as 0.1m cable with nylon plug on the secondary side (24V)
+49 9282 48731-15technik@bsc-technology.de
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
to the inquiry form
Interface with 2m mains cable and 0.1m cable with nylon plug on the secondary side (24V)
The fields marked with * are required.
I have taken note of the privacy policy.