The specially modified linear actuator type EA-L 120 enables efficient electromechanical operation of louvre windows. The actuator is designed to provide optimum functionality, stability and aesthetics.
Individual adaptations for louvre windows
The EA-L-120 linear actuator has been specially designed for use on louvre windows. It does not matter whether these are new buildings or windows that are being retrofitted. The linear actuator is suitable for both options. Individual adaptations to local conditions are also no problem.
The specially modified linear actuator type EA-L-1000/120-S efficiently opens louvre windows electromechanically. Since this is a synchro drive, the drives can only be operated in pairs. Single operation is not possible with this design. An electronic load cut-off monitors the current consumption of the drives in the synchro pairs and prevents overloading.
Visually appealing linear drive in Synchro design
The linear drive type EA-L 1000/120-S is also visually appealing. In combination with aesthetics, stability and functionality, the linear actuator is an all-round success. For use in other applications, the EA-L 1000/120-S synchro linear actuator can be combined with the EA-LF-L linear guide.
Of course, the actuator complies with all guidelines required for SHEV use.
Your advantages at a glance
- For use on louvre windows
- Can be installed on new and retrofitted windows
- Individual adaptations to local conditions possible
Technical data
- Input voltage 24 V DC
- Rated current 0.95 A
- Input voltage range - 20 % / + 25 %
- Stroke lengths 120 mm
- Max. Tensile / compressive force 1000 N
- Disconnection Integrated electronic load disconnection and potential continuation "F", Electronic end position disconnection, Optional synchronization disconnection, Integrated safety disconnection, up to 4 drives can be connected in parallel
- Running speed 6 mm/s
- Protection class IP54
- Duty cycle 30
- Ambient temperature range -5 °C - 75 °C
- Weight 3 kg
- Mounting type surface-mounted
- Housing Continuous aluminum profile tube, anodized E6/EV1 with integrated receptacle for flexible bracket system, length: 420 mm + 20 mm (cable gland), spindle with blind hole thread M10 for on-site connection
- Connections Silicone cable 3 x 0.75 mm², light gray (5 x 0.75 mm² for Synchro version) The length of the connection cable is 3000 mm
- Drive without fastenings
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Made in : | Germany |
| Design : | Spindle drive |
| Protection class : | IP 54 |
| Application : | For bottom-hung windows (without restriction to 15cm), Light domes, Rotating window, Tilt window, Top hung window |
| Stroke length can be shortened : | No |
| Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
| Signaling contact : | No |
| Voltage : | 24 V DC |
| RWA suitable : | Ja |
| Limit switch Open - Close : | integrated electronic load disconnection |
| Modell : | EA-L |
| Ambient temperature : | - 5° to + 75° C |
| Voltage range: | 24 V DC - 20% / + 25% |
| Stroke length: | 120mm |
| Thrust: | 1000N |
| Scope of delivery: | Drive without brackets |
| Dimensions: | see data sheet |
| Housing: | Aluminium |
| Current / Power: | 0.95 A |
| Tensile force: | 1000N |
Scope of delivery
Drive without brackets
Download Datenblatt SIMON PROtec Spindelantrieb EA-L-120