SIMON PROtec folding arm² swing door PA-KL²-DF-K-50/140deg

The PA-KL²-DF-K hinged arm² swing door operator is the short version of the PA-KL²-DF and also an extremely powerful operator for the electric motor-driven opening and closing of bottom-hung, top-hung and swing doors. It is suitable for use on inward and outward closing elements. It is mounted on the secondary closing edges.

The PA-KL²-DF drive can be used very flexibly with regard to the installation situation and direction of rotation. Depending on the type of installation, opening widths of up to 140° are possible, thus ensuring rapid smoke extraction and ventilation in the event of a fire. The PA-KL²-DF swing door actuator is tested and certified in accordance with DIN EN 12101-2 for use in a natural smoke and heat exhaust ventilation system and can also be used for controlled natural ventilation (KNL).

The PA-KL²-DF swing door operator has special kinematics and the high-performance gearbox (> 20,000 load cycles) in combination with the stainless steel lever arm is very resistant. With a push and pull force of 400 N and the extremely small installation dimension, this automatic opener is ideal for projects with a high demand on functionality and design.

The connection is made via the SICO-PLUG connector. This includes the SICO BUS programming interface, via which parameters such as opening stroke and force can also be parameterized directly on site and further status messages can be read out. The PA-KL²-DF swing door actuator can be networked with SHEV control centers and the building management system for remote operation.

In both end positions OPEN/CLOSED, the actuator also offers a potential-free contact. Operating sequence controls and start-up delay are freely adjustable. Due to the freely adjustable start-up delay, the swing door folding arm is ideal for the automated opening of secondary sashes. The PA-KL²-DF swing door operator can also be used in combination with an additional locking device.

Your advantages at a glance

• suitable for bottom-hung, top-hung and side-hung sashes
• versatile use on secondary closing edges
• Automation of inward and outward opening elements possible
• large ventilation cross-section
• low operating costs
• programmable via software interface

Technical data

• Input voltage 24 V DC
• Rated current 1.1 A
• Input voltage range - 15 % / + 15 %
• Residual ripple 500 mV
• Opening angle 140 °
• Compressive force 400 N
• Tensile force 400 N
• Nominal locking force 700 N
• Cut-off Integrated load cut-off with microprocessor
• Running speed 3.1 °/s
• Protection class IP54, IP65
• Duty cycle 30
• Mounting type surface mounted
• Weight 3.60 kg
• Housing Aluminum profile housing E6 / EV1 anodized
• Housing type Aluminum
• Color RAL & DB colors
• Housing length 368 mm
• Housing width 58 mm
• Housing height 118 mm
• Protection class III
• Connection cable SICO PLUG connection. Exclusive connection cable / set.
• Nominal operating temperature 20 °C
• Ambient temperature range 0 °C - 75 °C
• Actuator without mounting brackets, without connection cable, with 1x SICO-PLUG plug set