Chain drive systeQ-KM 25i R with radius chain
24 V DC chain drive for tilt and turn sashes for daily ventilation
To be ordered separately
Connecting cable, flexible, cross-section according to cable length between 2 x 0.5mm² and 2 x 1.5 mm² KM 25i R cannot be combined with drives D version.
Technical data
Switch off Open: programmed opening width
Switching off Closed: Tight closure via traction force of the chain drive
Execution: Solo
Pressure force: not permissible
Duty cycle: ED/on 150 s max. ; AD/off 450 s
stroke: 500 mm
Load cutoff: 1.2 A
power consumption: 26,4 W
Nominal voltage: 24 V DC
Rated current consumption: 1.1 A
Residual ripple: max. 15
Closing speed: ≤ 11 mm/s - normal
Protection class: IP 20
Tractive force: permissible max. 180 N
Opening speed: ≤ 11 mm/s
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Made in : | Germany |
| Stroke length can be shortened : | Ex works - on request |
| Application : | For bottom-hung windows (without restriction to 15cm), For standard tilt and turn windows |
| Voltage : | 24 V DC |
| RWA suitable : | Ja |
| Design : | Chain drive |
| Protection class : | IP 20 |
| Modell : | systeQ-KM 25i |
| Limit switch Open - Close : | AUF, OPEN: programmed opening width; CLOSED: tight closure via tensile force of the chain drive |
| Connection line : | flexible, cross-section according to cable length between 2 x 0.5 mm² and 2 x 1.5 mm² |
| Color: | silber |
| Voltage range: | 24 V DC |
| Stroke length: | 500mm |
| Scope of delivery: | Antrieb ohne Konsolen, ohne Anschlusskabel |
| Speed: | ≤ 11 mm/s |
| Tensile force: | zulässig max. 180 N |
Scope of delivery
Antrieb ohne Konsolen, ohne Anschlusskabel
Download Datenblatt esco Kettenantrieb systeQ-KM 25i 
