Chain drive systeQ-KM 35 D-S EN VH
24 V DC chain drive for bottom-hung, top-hung, side-hung, bottom-hung, swing and reversible sashes for daily ventilation and smoke extraction
To be ordered separately
Connecting cable, flexible, cross-section according to cable length between 2 x 0.5 mm² and 2 x 1.5 mm² With the VH version, a connecting cable to the VH, length 1m, is included in the scope of delivery. Covering hood for surface mounting or stiffening plate for concealed mounting absolutely necessary. For covering hood see below.
Technical data
Switch off Open: programmed opening width
Switching off Closed: Tight closure via traction force of the chain drive
Execution: Solo VH
Pressure force: max. 350 N
Duty cycle: ED/on 150 s max. ; AD/off 450 s
Load disconnection: > 1.2 A briefly
Power consumption: 23 W
Nominal voltage: 24 V DC (-10 %/+ 66%)
Rated current consumption: 0.95 A
Ripple: 2.4 Vpp max.
closing speed: ≤ 5 mm/s - slow
Protection class: IP 54
Tractive force: permissible max. 350 N
Opening speed: ≤ 10 mm/s
700 mm stroke not suitable for top hung sashes. Side hung sashes on request.
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Made in : | Germany |
| Stroke length can be shortened : | Ex works - on request |
| Protection class : | IP 54 |
| Application : | For bottom-hung windows (without restriction to 15cm), For roof windows, For standard tilt and turn windows, For top hung windows |
| Voltage : | 24 V DC |
| RWA suitable : | Ja |
| Design : | Chain drive |
| Limit switch Open - Close : | AUF, OPEN: programmed opening width; CLOSED: tight closure via tensile force of the chain drive |
| Modell : | systeQ-KM 35 |
| Connection line : | flexible, cross-section according to cable length between 2 x 0.5 mm² and 2 x 1.5 mm² |
| Color: | silber |
| Voltage range: | 24 V DC (-10 %/+ 66%) |
| Stroke length: | 300mm |
| Thrust: | 350N |
| Scope of delivery: | Antrieb ohne Konsolen, ohne Anschlusskabel; bei Ausführung VH ist im Lieferumfang ein Verbindungskabel zum VH, Länge 1m, enthalten. Abdeckhaube bei aufgesetzter Montage bzw. Versteifungsplatte bei verdeckter Montage zwingend erforderlich. |
| Speed: | ≤ 10 mm/s |
| Tensile force: | zulässig max. 350 N |
Scope of delivery
Antrieb ohne Konsolen, ohne Anschlusskabel; bei Ausführung VH ist im Lieferumfang ein Verbindungskabel zum VH, Länge 1m, enthalten. Abdeckhaube bei aufgesetzter Montage bzw. Versteifungsplatte bei verdeckter Montage zwingend erforderlich.
Download Datenblatt esco Kettenantrieb systeQ-KM 35