Spindle drives, sometimes also called lifting spindle motors, push out a push rod in the longitudinal direction of the drive by...
Chain drives push a back-stiff chain out of the housing at a 90° angle. Back stiff means that the chain can only bend in one direction. For this...
In rack drives, a gear motor mounted on the side pushes a steel rack out or in via a pinion. The rack is guided in a tube. The...
Pneumatic cylinders are often used in SHEV systems. They do not require an electrical connection, but are operated with CO2 (up to 60bar...
Steel cylinders filled with CO2 (carbon dioxide) are used in local
Alarm boxes, often also called emergency release stations or CO2 emergency release boxes, are mounted at eye level in the area of access points and are...
Pushbutton valves are used when pneumatically operated SHEV systems are not only to be opened with CO2 in case of fire, but also ventilation...
Thermal releases, often called thermal initiators or TAGs, are used to trigger a smoke and heat exhaust ventilator (SHEV) locally in the...
Compressed gas generators are pyrotechnic elements and are used for remote triggering of thermal tripping devices. When a...
Quick exhaust valves are used to vent pressurized systems more quickly and thus allow cylinders to run faster.
Check valves allow the medium (CO2, compressed air, oil, water, ...) to flow through in one direction only.
In this category you will find useful accessories for the maintenance of SHEV systems. For example, you can use an adapter to operate...
Here you will find various connection fittings for our pneumatic cylinders. Common connection tube diameters are 4, 6, 8mm. Please note...
Wind/rain detectors ensure that windows or skylights close when it rains or storms. In this category we have listed the most common...
This category deals with sensors that are often used in weather stations or special controllers. The measured values are output, for example,...
Load cut-offs are electronic modules that ensure that drives switch off correctly when they are blocked or have...
We are happy to support you in finding suitable solutions for your requirements and wishes. Functionality, safety, comfort and design are important aspects. Benefit from our years of experience - we look after you from the initial idea to...
Our buying guide will probably help you find the right set faster. We show you what you have to pay attention to and...
Our buying guide will probably help you find the right set faster. We show you what you have to...
Our buying guide will probably help you find the right set faster. We show you what you have to pay attention to and which...
B-goods are as-new demonstration units, samples and exhibition items as well as customer returns.
Product finder Step by step to the right product
>> To our product consultants
Telephone consultation: Head office: 09282 48731-0 Technology: 09282 48731-15 Accounting: 09282 48731-16
Email support Headquarters: info@bsc-technology.de Technology: technik@bsc-technology.de Accounting: buchhaltung@bsc-technology.de
>> To the contact form
Printable checklists Send in and receive offer
>> To the checklists
Color:
Delivery time 23 - 26 Working daysImportant info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
In the Syncro³ version, the drives communicate with each other via a direct connection, which allows the force, speed and resistance of the individual drives to be controlled at any time by reading the operating encoders assigned to the individual motors. The constant exchange of information allows the drives to open and close in a synchronized manner. Syncro³ is the evolution of the first patent, which provided for the installation and wiring of a maximum of two directly connected motors. Today, Syncro³ software allows up to 8 motors to be directly connected to each other without the need for centralized controls for external synchronization.The number of drives to be attached to the clamping device during Syncro³ operation depends on its dimensions, weight and type. From a width of 1,200 mm, the use of two motors is recommended to ensure that the closing device is moved correctly and closes tightly all around. The use of another drive is recommended every additional 1,200 mm of width.
Electric chain drive with double-row four-link chain enclosed in a proper aluminum container. The drive is suitable for the movement of top-hung and bottom-hung windows as well as domes and hatches. Push and pull force 300 N. Designed for an operating voltage of 110 / 230V AC (50/60 Hz) or, in the case of SHEV systems, 24V DC low voltage in accordance with the European standard EN 12101-2. Included in the delivery are universal hinged retaining brackets with quick coupling and without screws. End of travel cut-off during opening electronically with three strokes (200 - 300 - 500 mm) that can be adjusted at any time using dip switches, during closing controlled by power consumption and generally acting as overload protection. Soft-Stop and Relax functions. Parallel connection possible. Standard colors: black (RAL 9005) with black cable, white (RA L9010) and gray (RAL 9006) with white cables. The 24V DC versions have a black silicone cable. For other features, please refer to the technical data table.Conforms to the relevant EU directives (EMC directives, low voltage directives).
+49 9282 48731-15technik@bsc-technology.de
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
to the inquiry form
Drive incl. universal foldable holding brackets with quick coupling and without screws
The fields marked with * are required.
I have taken note of the privacy policy.