BSC Wind monitor W24V1 switching point 8m/s - 24V

BSC Wind monitor W24V1 Switching point 8m/s - 24V

Wind monitors are used to monitor the wind speed in domestic and industrial applications. The control electronics is integrated in the wind sensor. When the switching threshold of e.g. 8 m/s is reached, the built-in relay switches from normally closed contact to normally open contact after the switch-on delay of approx. 8 s. The relay is activated by the wind sensor. If the wind speed is below the switching threshold of e.g. 8 m/s for more than 5 min., the wind monitor switches back to the idle state.

Technical data

• Measuring range 0...35m/s
• Set point fixed at 8 m/s (other switching points are possible)
• Wind load max. 50 m/s
• Starting speed approx. 1,0 m/s
• Tolerance +/- 2 %
• Connection cable 5 m - 5 x 0,5 mm
• Wind transmitter painted in aluminum color
• all screw connections and ball bearings are made of stainless steel
• Switch-on delay fixed at 8 sec.
• Switch-off delay fixed at approx. 6 min.
• Output potential-free change-over contact
• Dimension: shell cross diameter 160 mm, total height 190 mm, mast mounting diameter 50 mm
• Weight: 0,9 kg
• Switching capacity: 0.8 A / 24 VAC
• Supply voltage: 24 VAC and 24 VDC
• Current consumption: approx. 30 mA (with heater < 70 mA)