Actulux wind and rain detector AWR 25/250

The wind and rain sensor #111961 consists of a wind wheel and a rain sensor surface.
It is designed for automatic control of SHEV and ventilation systems. The rain sensor #111960 is provided with a rain sensor surface on the sensor cover. Both sensors are equipped with a dry contact relay with a switching capacity of 250VAC / 8A or 24VDC / 8A.
The relay is activated by wind and/or rain. The settings for the wind trigger point are set by means of the rotary switch.

WIRELESS CONNECTION

It is possible to connect the sensors wirelessly to the Actulux SV/SVM system controllers or to the Actulux Flex1 ACDC through the RF transmitter #111892 to be mounted in the sensor.
Range: line of sight approx. 400 meters
However, the Actulux system controllers must be equipped with RF receiver module:

• #111894 for SVM system controls
• #111895 for SV system controls

Technical Data

• Power supply: 18V to 35VAC / 20V to 35VDC / 200V to 250VAC
• Output contacts: NO-NC 1 x floating relay with supervision
• Switching capacity: 250VAC / 8A or 24VDC / 8A
• Dimensions: 80 x 160 x 55 mm (WxHxD / without wind wheel)
• Weight: Approx. 0,7 Kg
• Protection class: IP65
• Adjustment of the wind module: From 1 to 9 m/s ( 20%)
• CE marking: In accordance with EMC and Low Voltage Directive
• Connection must be done by specialists only
• Depending on the degree of pollution, the sensor surface must be cleaned regularly with a damp cloth with water -No abrasive agents
• RF transmitter #111892 (optional)
• Bracket kit for roof mounting #99600024
• Bracket kit for wall mounting #99600025