Brennenstuhl Multi Battery LED rechargeable construction spotlight 3000 MA (LED work spotlight 3150lm, IP65, work light)

Brennenstuhl Multi Battery LED construction spotlight 3000 MA (LED work light 3150lm, IP65, work light compatible with 18V batteries from 7 different power tool manufacturers, without battery, engineered in Germany)

• Rechargeable LED construction spotlight 30W compatible with various 18V batteries (different Ah classes) from 7 power tool manufacturers: Bosch Professional, Dewalt, Festool, Flex, Makita, Metabo CAS, Milwaukee - attach adapter (all included) and insert battery
• The cordless spotlight offers a light duration of approx. 5h/4Ah at a light output of 50% (approx. 2.5h/4Ah at 100% light output) - the light duration depends on the battery used (supplied without battery)
• Construction site floodlight with 4 switching levels (100% - 75% - 50% - 25%) and protection system for Power-Tool batteries: protected against deep discharge, overheating (caused by high load currents) and battery faults
• LED construction spotlight with 3150lm for optimum light distribution and large-area illumination and work light with reduced glare - Brennenstuhl is part of AMPShare - Powered by Bosch Professional
• Lightweight and robust rechargeable LED work light offers stable use thanks to flexible feet - can be used upright and lying flat (for large-area illumination) and mounted on a tripod

Thanks to the brennenstuhl® Multi Battery 18V system, the extremely robust and bright Multi Battery LED work light with 30 W output is compatible with various 18V batteries (different Ah classes) from the seven power tool manufacturers Bosch Professional, Dewalt, Festool, Flex, Makita, Metabo CAS and Milwaukee. Regardless of which battery system is already in use, the interface technology enables maximum flexibility and allows you to use the battery system of your choice. The appropriate adapter (all included) can be fitted to the interface with just a flick of the wrist. LED construction spotlight with 3150 lm offers optimum light distribution thanks to wide-area illumination with reduced glare. The impact-resistant construction spotlight can be used flexibly and as required, whether standing upright, lying flat for large-area illumination or mounted on a tripod. The impact-resistant work spotlight with enormous luminosity thanks to built-in SMD LEDs also has a battery status display for the remaining energy of the battery used (the batteries must be charged externally) and a protection system for Power Tool batteries. This protects the batteries used against deep discharge and overheating (caused by high load currents). The Multi Battery LED spotlight also impresses with the following features:

• With on/off switch
• LED spotlight with tilt protection, protects the working light and housing of the spotlight
• Ergonomic handle
• Tripod mounting possible
• Lighting duration depending on the battery used:

approx. 38 min/1Ah at 100% light output,
approx. 51 min/1Ah at 75% light output,
approx. 76 min/1Ah at 50% light output,
approx. 152 min/1Ah at 25% light output

• With 4 switching levels (100% - 75% - 50% - 25%), full power immediately when switched on
• Power consumption: 27 W
• Luminous flux: 3150 lm
• Protection class: IP65
• Impact resistance: IK08
• Protection class: III
• Category 2 (K2) equipment: For use in harsh operating conditions with high mechanical, physical and chemical impacts

Technical data

• Housing material: Rubberized plastic
• Height: 22.70 cm
• Length: 16.90 cm
• Weight: 2.29 kg
• Width: 28.50 cm
• Voltage: 18 V
• Type of light: Spotlight
• Luminous flux: 3,150 lm
• Protection class: III
• Input voltage type: Direct voltage (DC)
• With on/off switch:
• Protection class (IP): IP65
• Impact resistance: IK08
• Color temperature: 6500 K
• Nominal input voltage: 18 V