BSC Wind-rain detector WR230V2-H with separate control unit - 230V

Wind - rain monitor  switching
awnings - dome light control with sep. control unit
output 1 potential-free changeover contact
operating voltage 230VAC

The control is used to detect the wind speed and rain. Field of application is the control of shading systems, dome lights, markings  and building automation. Connection to bus systems is also possible via a binary input. The control consists of control electronics and a sep. sensor. The switching point for the wind speed is adjustable.

Technical data:

Wind - Rain control
Output 1 potential free changeover contact
Measuring range: 0...35 m/s
Wind speed: max. 50 m/s
Starting speed: approx. 1,0 m/s
Set point for speed is adjustable.
Rain sensor with 60 mm diameter - heated
Cup cross diameter: 160 mm
Dimension:

• Sensor 240 x 80 mm Height 200 mm
• Control electronics 98 x 75 x 110

Cable entry with Pg 9 gland or connection cable 3 m - 5 x 0,5 mm²
Control: light grey
Weight: 2 kg
All glands and ball bearings are made of stainless steel Wind transmitter shells can be screwed on.
Supply voltage: 230 VAC
Current consumption: < 200 mA
Switch-on delay:

• Rain immediate
• Wind fixed at approx. 8 sec.

Switch-off delay:

• Rain after drying by heating
• Wind fixed at approx. 6 min.

Output 1 potential-free change-over contact - Switching capacity 230 VAC: 2 A

Wiring diagram:

17 ---- -

                        230V/50Hz, 24 V/DC, 24V/AC    +/- 10 % Supply voltage

19 ---- +

 

20 ---- 2

 

21 ---- 3