Product finder
Step by step to the right product

>> To our product consultants

Printable checklists
Send in and receive offer

>> To the checklists

Windowmaster Wind-/ Regen-Set zur Ansteuerung von 230 V AC-Antrieben in Hallendächern

Windowmaster wind/rain set for control of 230 V AC drives in hall roofs

S10453
IC-WRS114

Delivery time 12 - 15 Working days
Important info about the delivery time specification

€709.24 *

incl. VAT plus shipping costs

Leave your email address and stay informed about this article.

as soon as the item is back in stock
as soon as the item drops in price
as soon as the item is available as a special offer
  • W+RE B/4
The wind/rain set consists of a control unit and a wind/rain sensor. It is used for automatic... more

The wind/rain set consists of a control unit and a wind/rain sensor.
It is used for automatic ventilation control of 230V drives, solenoid valve controls, solenoid pulse valve controls for windows, dome lights and awnings.
The control electronics is equipped with 4 potential-free change-over contacts (for 4 motor groups) with a contact load capacity of 230VAC/5A/50Hz each.
In case of wind and/or rain, all 4 changeover contacts are simultaneously switched from the normally closed contact to the normally open contact.
The motors connected here, for example, move to the closed position or to their idle state.
The settings for the wind release threshold, drop-out delay as well as a changeover between continuous and pulse operation are made via a 5-pole DIP switch on the control board.

Technical data

  • Supply voltage: 230VAC / 50Hz
  • Fuse: F1 = T 315mA
  • Power consumption: 75 VA with max. group extension
  • Switching outputs: 4 x potential free change-over contact
  • Switching capacity: 4 x 230VAC / 5A
  • (Attention: max. 10 drives per group)
  • Adjustment of wind release: approx. 3 to 14 m/s (+ / - 20%)
  • Setting of wind / rain release delay: 10 min. / 20 min.
  • Setting of relay release: continuous release / pulse release (2 sec.)
  • Color of the switch housing: light gray / RAL 7035
  • Dimensions of the switch housing: 180x 180 x 75mm (WxHxD)
  • Weight of the switch housing: approx. 1kg
  • Protection class of the switch housing: IP 42 (vertical installation)
  • Dimensions of the sensor: 80 x 160 x 55mm (WxHxD / without wind wheel)
  • Weight of the sensor: approx. 0,7kg
  • Protection class of the sensor: IP65
  • CE mark Conforms to EU directives
  • The connection of the control unit must be carried out by qualified personnel.
  • Observe VDE 0100 for 230 Volt mains connection.
  • Observe VDE 0855 as for antenna systems regarding mechanical strength, electrical safety and lightning protection.
  • The sensor must be cleaned regularly depending on the contamination.

Technical advice

+49 9282 48731-15
technik@bsc-technology.de

Fast delivery

... of goods in stock. Orders placed before 14:00 are usually shipped the same day.

Questions about the article

to the inquiry form

Technical data more
Scope of delivery: The wind/rain set consists of a control unit and a wind/rain sensor.
Scope of delivery & accessories more

Scope of delivery

The wind/rain set consists of a control unit and a wind/rain sensor.

Read, write and discuss reviews... more
Customer reviews for "Windowmaster wind/rain set for control of 230 V AC drives in hall roofs"
Write rating
Reviews will be activated after verification.

The fields marked with * are required.

Last viewed