Delivery time 9 - 12 Workdays
Prices incl. VAT plus shipping costs
Hinterlegen Sie Ihre Email Adresse und bleiben Sie stets über diesen Artikel informiert.
Synchronous module SM3
For operating two drives on a window or on a roof flap
The synchronous module SM3 is a microprocessor-controlled synchronization and shutdown control for the simultaneous operation of two smoke extraction and / or ventilation drives 24 V DC at an opening element (wing / dome, etc.). The design of the synchronous module is determined by the application and the current consumption of the drives.
Advantages / features:
For operation of two drives with signalers, without limit switches,
without built-in load shutdown
Safe operation for lifting distances up to 1,000 mm, regardless of the operating times of the drives and
the material of the windows or roof flaps
For distances between SM3 and drives up to 10 m cable length
Compensation of possible runtime differences due to integrated overshoot times in the ZU direction
Factory preset shutdown thresholds for lifting and lowering operation
Additional configuration options via the service port interface
For operation of two drives with signalers, without limit switches, without built-in load shutdown
If load-related differences occur, these are automatically compensated and exact synchronization is ensured
In the end positions and overload in the intermediate positions, the drives switch off due to the integrated current-dependent overload shutdown
The synchronous module locks after reaching the end position against multiple actuation in the same direction and can only be controlled in the opposite direction
Defective or missing drives are detected and the control of other connected drives is prevented
Space requirements for mounting and dimensions, please refer to the data sheet!
Further information like datasheet, assembly instructions for the drive can be found under the tab "Downloads".
Photos, videos and diagrams: Source © STG Beikirch
|Voltage :||24 V DC|
|Ambient temperature :||0°C .. +70°C|
|Made in :||Germany|
|Protection :||IP 54|
|Scope of delivery:||Synchronmodul|
|Dimensions:||110 x 110 x 66,7mm|