D+H Room sensor for carbon dioxide, temperature and humidity (RACO2/T/F-U-D)

• Room sensor for carbon dioxide, temperature and humidity measurement in residential and office buildings
• For controlling ventilation dampers in conjunction with the CPS-M1 and the ADM.
• Surface mounting
• Measuring ranges: Humidity: 0 ... 100 %, Temperature: 24 preset ranges adjustable, CO2: 0 ... 2000ppm / 0 ... 5000 ppm
• 0 - 10 V output signal

The room sensor RACO2/T/F-U-D is perfectly suitable for carbon dioxide, temperature and humidity measurement in residential and office buildings in connection with the ADM of the CPS-M1.
The measurement is performed by an NDIR sensor, within a range of 0...2000 ppm or 0 ...5000 ppm, while the measurement result is output via an output signal of 0...10 V. The sensor covers different measuring ranges.
The current measurement results can be conveniently read via the display.
Note: The sensor is designed for normal ambient conditions (room air) - aggressive gases can destroy it. The installation location has a decisive effect on the measurement accuracy. Windows (cold outside wall) or door proximity (draught) should be avoided.
The CO2 concentration is a decisive measured value for a good room climate. In connection with the ADM an automatic ventilation control can be realized.

• Mounting type: Surface mounting
• Dimensions (W x H x D): 87.5 x 87.5 x 30 mm
• Operating voltage: 24 V DC
• Output signal: 0 - 10 V
• Protection class: IP 30
• Temperature: 24 ranges adjustable
• CO2: 0 ... 2000ppm / 0 ... 5000 ppm
• Air humidity: 0 ... 100
• Color: White
• Weight: 105 g
• Scope of delivery: 1 x room sensor RACO2/T/F-U-D, instruction manual