H-Tronic 2-channel temperature switch TS 2125 - 7 devices in ONE

Function

Powerful, clear and versatile - the new 2-channel temperature switch TS2125 with 7 different functions, is ideal for all applications where temperature control in heating or cooling mode is required. A blue two-line LC display shows the switch-on and switch-off temperature, the current temperature, the setting parameters and the min./max. value. The device is not only clear and easy to handle, but also safe to use, because sensor short-circuit and sensor interruption are detected immediately. The thermoswitch can be used independently, but also as a replacement for defective mechanical thermostats or for digital thermometers. In addition, the device has a separate min/max alarm setting.
If the temperature is outside the set window, a relay can be switched after an adjustable delay time of 0 to 8 hours per channel, e.g. for an alarm message. An internal (can be switched off) alarm beeper emits a warning signal depending on the setting (sensor error). All parameters are freely adjustable.

Operating modes

• Manual mode (manual operation)
• Thermometer for channel 1
• Thermometer for ch. 1 and 2
• Thermoswitch for ch. 1 (with alarm function)
• Thermoswitch for ch. 1 and ch. 2 (with alarm function)
• Temperature difference controller (with alarm function)
• Circulation pump control (with alarm function):
• Saves electricity and heating costs
• Prolongs the life of the circulation pump
• No intervention in the pipe installation required
• permanent monitoring of flow and return temperature

Features

• Switching temperature freely adjustable from -55 to +125.0 °C
• Hysteresis freely adjustable
• Remote measurement up to 50m possible
• Sensor monitoring for short circuit and interruption
• Relay state adjustable in case of sensor error
• Adjustable to heating, cooling or temperature difference control
• LED indicators for relay on, sensor error and alarm
• Data retention in case of power failure

Scope of delivery

The scope of delivery includes the 2-channel temperature switch TS2125 with operating instructions and a metal temperature sensor, cable length approx. 2 meters. (Please note that an additional temperature sensor is required for operating modes 2, 4, 5 and 6)

Technical data

• Operating voltage: 230 V/AC
• Power consumption: approx. 3 VA
• Output: 4 potential-free relays, max. 3 kW
• Measuring range: -55...+125.0 °C
• Accuracy in range: -55°C...-10°C: +/-2°C; -10°C...+ 85°C: +/- 0.5°C;  +85°C...+ 125°C: +/-2°C
• Resolution: 0.1 °C steps
• Min. max. display
• Protection class IP 20
• Dimensions W/D/H (mm): 160/120/60