Spindle drives, sometimes also called lifting spindle motors, push out a push rod in the longitudinal direction of the drive by...
Chain drives push a back-stiff chain out of the housing at a 90° angle. Back stiff means that the chain can only bend in one direction. For this...
In rack drives, a gear motor mounted on the side pushes a steel rack out or in via a pinion. The rack is guided in a tube. The...
Pneumatic cylinders are often used in SHEV systems. They do not require an electrical connection, but are operated with CO2 (up to 60bar...
Steel cylinders filled with CO2 (carbon dioxide) are used in local
Alarm boxes, often also called emergency release stations or CO2 emergency release boxes, are mounted at eye level in the area of access points and are...
Pushbutton valves are used when pneumatically operated SHEV systems are not only to be opened with CO2 in case of fire, but also ventilation...
Thermal releases, often called thermal initiators or TAGs, are used to trigger a smoke and heat exhaust ventilator (SHEV) locally in the...
Compressed gas generators are pyrotechnic elements and are used for remote triggering of thermal tripping devices. When a...
Quick exhaust valves are used to vent pressurized systems more quickly and thus allow cylinders to run faster.
Check valves allow the medium (CO2, compressed air, oil, water, ...) to flow through in one direction only.
In this category you will find useful accessories for the maintenance of SHEV systems. For example, you can use an adapter to operate...
Here you will find various connection fittings for our pneumatic cylinders. Common connection tube diameters are 4, 6, 8mm. Please note...
Wind/rain detectors ensure that windows or skylights close when it rains or storms. In this category we have listed the most common...
This category deals with sensors that are often used in weather stations or special controllers. The measured values are output, for example,...
Load cut-offs are electronic modules that ensure that drives switch off correctly when they are blocked or have...
We are happy to support you in finding suitable solutions for your requirements and wishes. Functionality, safety, comfort and design are important aspects. Benefit from our years of experience - we look after you from the initial idea to...
Our buying guide will probably help you find the right set faster. We show you what you have to pay attention to and...
Our buying guide will probably help you find the right set faster. We show you what you have to...
Our buying guide will probably help you find the right set faster. We show you what you have to pay attention to and which...
B-goods are as-new demonstration units, samples and exhibition items as well as customer returns.
Product finder Step by step to the right product
>> To our product consultants
Telephone consultation: Head office: 09282 48731-0 Technology: 09282 48731-15 Accounting: 09282 48731-16
Email support Headquarters: info@bsc-technology.de Technology: technik@bsc-technology.de Accounting: buchhaltung@bsc-technology.de
>> To the contact form
Printable checklists Send in and receive offer
>> To the checklists
Ready to ship today, Delivery time appr. 1-3 workdaysImportant info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
You want to operate your fan heater, an air conditioner or a humidifier intelligently?Your greenhouse should be heated or ventilated at the right moment?
With the temperature-humidity switch TLF1000 you get the optimal solution!
The connected consumers are only switched on if the current values for temperature and humidity deviate from the previously set target values. This way you can ensure a comfortable indoor climate, avoiding health-endangering mold growth or creating a certain humidity level in your greenhouse.
The TLF1000 is operated with a temperature-humidity sensor. It is particularly suitable for temperature and ventilation control, where the current indoor climate can be actively controlled (e.g. via heaters, ventilation flaps or humidifiers connected to the controller) and independently of the current outdoor temperature and humidity.
The temperature-humidity switch TLF1000 with four potential-free relay outputs can measure the current temperature as well as the current relative humidity with the help of the sensor TH-1. Based on these values, various humidity as well as temperature controls can be realized. Room ventilators for supply or exhaust air can be controlled directly via 4 integrated potential-free relays. Furthermore, different devices can be controlled, which are used for heating, cooling, dehumidifying or humidifying. Typical applications are temperature control in heating or cooling mode, measurement of temperature and humidity, and room drying/dehumidification.
+49 9282 48731-15technik@bsc-technology.de
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
to the inquiry form
Temperature-humidity switch
The fields marked with * are required.
I have taken note of the privacy policy.