GEZE swing door drive ECturn Inside

Integratable electromechanical swing door operator for barrier-free single-leaf doors weighing up to 125 kg

Product features

• Operator is recessed in door leaf or frame and meets highest design requirements
• Opening and closing speed can be adjusted individually
• Electric end stop that accelerates the door just before it closes
• Low-energy function opens the door at reduced travel speed and thus meets the highest safety requirements
• Obstacle detection detects an obstacle by touch and stops the opening or closing process
• Automatic reversing detects an obstacle and returns to the opening position
• Push &|-| Go function triggers the automatic drive after light manual pressure on the door leaf
• Operator is used with slide rail
• Optional rechargeable battery provides maximum safety in case of power failure
• Optional radio board for wireless control via radio transmitter

Areas of application

• Single-leaf right and left single-action doors
• Single-action doors up to 1100 mm leaf width and 125 kg weight
• Entrance and interior doors with moderate traffic frequency
• For door leaf thicknesses from 55 mm
• Integrated mounting in door leaf or frame
• Barrier-free access

Product data table

• for mounting integrated in door leaf or frame with opening limiter, power supply and door transition cable
• Height: 61 mm
• Depth: 45 mm
• Leaf weight (max.): 125 kg
• Sash width (min.-max.): 700 mm 1100 mm
• Drive type: electromechanical
• Door opening angle (max.)*: 110 °
• DIN left: Yes
• DIN right: Yes
• Mounting in door leaf: Yes
• Mounting in door frame: Yes
• Electrical end stop: Yes
• Actuation delay (max.): 10 s
• Operating voltage: Drive: 24.5 - 30 V DC
• Operating voltage: 230 V
• Supply voltage power supply: 110 - 230 V
• Frequency supply voltage: 50 Hz 60 Hz
• Rated power: 75 W
• Power supply for external consumers (24 V DC): 600 mA
• Operating temperature: -15 °C 50 °C
• Protection class: IP20
• Operating modes: Off, Automatic, Permanent open, Night
• Function type: Fully automatic
• Automatic function: Yes
• Function Low-Energy: Yes
• Function buttons: Yes
• Obstacle detection: Yes
• Automatic reversal when obstacle is detected: Yes
• Push &|-| Go: adjustable
• Operation: Program switch integrated in drive, program switch TPS
• Parameterization: Control unit, program switch DPS
• Approvals: DIN 18650, EN 16005