K+G Spindle drive S08B
Delivery time 12 - 15 Working days
Important info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Spindle drive S08B
24V electric - push rod actuator in anodized aluminum housing. Anodized aluminum - push rod
Technical data:
- 24V- electric - spindle drive in anodized aluminum housing. Anodized aluminum push rod
- Rated current 0,8A
- Shapely / space saving housing. Lowest space requirement with lower suspension
- Extremely low noise level
- Ambient temperature range -20 to +60°C, according to VdS 2580 for 2h to +110°C
- Electronic end position switch-off / emergency switch-off in case of overload
- Dimensions: see data sheet
- Protection class according to DIN EN 60529: IP42 (for use in dry rooms)
- Light gray silicone connection cable, led out at the bottom, length approx. 2.5m, temperature range -50 to +180°C (according to DIN VDE 0282)
- Suspension at top, bottom or variable by mounting set (see mounting sets for screw actuators S)
- Diameter of thrust tube and bottom - eye 6,1mm
- Option: Painting of the actuator housing in a RAL - color (price on request)
- Scope of delivery: actuator without mounting material
Intended use:
The drive is used to open and close windows, blinds and flaps in the roof area (no free access by non-system personnel). When voltage is applied, a move command is triggered.
The drives are suitable for connection to K+G pneumatic control units. In case of control by other control units or other power supplies, the compatibility must be checked. Since the drives do not have a housing grounding, it must be ensured by the control system that no voltages are fed to the drives via protective extra-low voltage (keyword galvanic isolation at the transformer, etc.)
Material:
- Spindle drive in anodized aluminum housing. Anodized aluminum push rod
- Option: Painting of the actuator housing in a RAL - color (price on request)
You will receive the actuator without mounting material (please order separately). |-|
More information such as data sheet, mounting instructions for the actuator can be found under the tab "Downloads".
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Design : | Spindle drive |
Voltage : | 24 V DC |
Modell : | S08B |
Color: | Silver anodized |
Voltage range: | 24V DC |
Stroke length: | 350mm |
Thrust: | 650N |
Scope of delivery: | Drive without fastening material |
Dimensions: | see assembly instructions |
Housing: | Aluminium |
Speed: | 6mm/s |
Current / Power: | 0,8A |
Tensile force: | 650N |
Scope of delivery
Drive without fastening material