BSC Spindle drive JM-DC-B
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
SHEV spindle drive for skylight domes
Version "B" with additional rear suspension (hole diameter 6.1mm)
The electric motor drive is enclosed in a sturdy aluminum housing and is suitable for opening roof flaps, skylight domes and window sashes. It can be used for daily ventilation as well as a SHEV drive. In combination with the extensive accessories, the design of the motor opener offers a wide range of applications. The drive meets the requirements of fire testing based on DIN EN 12101-2.
With the aid of external load disconnections in various designs (for solo, tandem or synchronous operation), practically all areas of application are thus covered.
The most common application of these actuators is the electrical opening of smoke ventilation elements that are dimensioned according to geometric smoke ventilation area (stairwell SHEVS or similar).
The motor opener as a permanently lubricated spindle drive may only be operated with an external electronic load cut-off, which must be ordered separately. The electronic load cut-off limits the lifting force in both lifting directions to the specified value.
VERY IMPORTANT
The actuator is supplied without external load cut-off, this is available separately and is absolutely necessary!
Suitable load cut-offs are LA-1 (Art.-No. 1616) and LA-2 (Art.-No. 1605).
Please order angle bracket WK1 (Art.-No. 2763) for mounting separately!
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Made in : | Germany |
Design : | Spindle drive |
Stroke length can be shortened : | Ex works - on request |
Humidity : | NOT suitable for outdoor use! Our actuators of type JM... are designed for dry rooms. Of course, they can also be operated for a short time at maximum humidity, but permanently the function is not ensured under these conditions. |
Signaling contact : | No |
Application : | For bottom-hung windows (without restriction to 15cm), Tilt window |
Protection class : | IP 65 |
Voltage : | 24 V DC |
Connection line : | 2x1mm² |
Operating mode : | S1 |
Limit switch Open - Close : | NONE, external load disconnection necessary! |
RWA suitable : | Ja |
Modell : | JM-DC-B |
Ambient temperature : | -20°C - 70°C |
Color: | Silver anodized |
Voltage range: | 24 V DC +4/-2 V |
Stroke length: | 125mm |
Thrust: | 650N |
Scope of delivery: | Drive, without brackets Please order angle bracket WK1 for mounting separately! |
Housing: | Aluminium |
Speed: | 6mm/s |
Current / Power: | 19,2W/0,8A |
Tensile force: | 650N |
Scope of delivery
Drive, without brackets Please order angle bracket WK1 for mounting separately!