Delivery time 58 - 61 Working days
Important info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
This very compactly built drive is suitable for linear movements of all kinds. With the principle of the trapezoidal threaded spindle in combination with a powerful gear motor, high thrust forces and speeds can be realized. All components are protected against corrosion by appropriate surface treatments. The motor is suitable for parallel operation. Simultaneous control for the "open" and "close" directions will destroy the actuator.
The drive is maintenance-free due to the excellent lifetime lubrication. The stroke range is limited by built-in limit switches. Several actuators can be connected in parallel by means of an integrated relay. Due to the heat load in case of fire, no plastic is used for load-bearing components.
On request, the actuators can also be supplied with armature stop brake (ASTO).
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Made in : | Germany |
| Design : | Spindle drive |
| Stroke length can be shortened : | Ex works - on request |
| Voltage : | 230V AC |
| Humidity : | NOT suitable for outdoor use! Our actuators of type JM... are designed for dry rooms. Of course, they can also be operated for a short time at maximum humidity, but permanently the function is not ensured under these conditions. |
| RWA suitable : | No |
| Application : | Light domes |
| Protection class : | I (protective earth) |
| Signaling contact : | No |
| Protection class : | IP 44 |
| Limit switch Open - Close : | Open / Close with microswitch |
| Modell : | JM...0 |
| Connection line : | Silicone cable 4x1mm², approx. 1.95m long |
| Operating mode : | Continuous operation S1 |
| Color: | Silver anodized |
| Stroke length: | 300mm |
| Thrust: | 1000N |
| Scope of delivery: | Drive, without brackets |
| Dimensions: | Ø 80mm x 700mm |
| Housing: | Aluminium |
| Speed: | 8.5mm/s |
| Current / Power: | 0,43A |
| Tensile force: | 1000N |
Scope of delivery
Drive, without brackets
Accessories
-
Download Datenblatt JM-AA-5000-0 (DE) - Download Datenblatt JM-AA-3000-0 (DE)
- Download Datenblatt JM-AA-2000-0 (DE)
- Download Datenblatt JM-AA-1000-0 (DE)
- Download Datenblatt JM-AA-1000-0 (EN)
- Download Datenblatt JM-AA-2000-0 (EN)
- Download Datenblatt JM-AA-3000-0 (EN)
- Download Datenblatt JM-AA-5000-0 (EN)
