Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Rack and pinion drive ZA-0300-1-PLP
The rack and pinion drive for roof and facade windows as well as skylight domes: The ZA-0300-1-PLP is suitable for SHEVS according to DIN EN 12101-2 and daily ventilation with a low current consumption of only 0.5 A.
Performance features:
- Can be used for openings for smoke ventilation, D+H Euro-SWA according to DIN EN 12101-2 as well as for daily ventilation
- With microprocessor controlled motor electronics
- Low power consumption due to high efficiency
- Cable entry possible at top and bottom
- Drive unit can be changed from left to right
- Drive functions and various drive parameters programmable
- Running speed in CLOSE direction reduced to 5 mm/s (passive closing edge protection)
- Time-controlled reversing when an obstacle is detected in CLOSE direction (active closing edge protection)
Due to the large selection of brackets, the rack and pinion drive can be mounted on the main closing edge as well as on the secondary closing edge
Closing edge.
You will receive the drive with connecting cable, without fixing sets (please order separately).
For space requirements for mounting and dimensions, please refer to the data sheet!
Painting in RAL please on request!
More detailed information such as data sheet, assembly instructions for the drive can be found under the tab "Downloads".
If you have any technical questions, please do not hesitate to contact our technical department at 09280/981119-15.
Photos, videos and diagrams: Source © D+H Mechatronik AG
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
| Made in : | Germany |
| Application : | For roof windows, Light domes |
| Stroke length can be shortened : | No |
| Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
| Signaling contact : | No |
| Protection class : | IP 65 |
| Voltage : | 24 V DC |
| RWA suitable : | Ja |
| Design : | Rack and pinion drive |
| Limit switch Open - Close : | Electronic load disconnection |
| Ambient temperature : | -5 to +75°C |
| Connection line : | 2.5 m silicone cable |
| Modell : | ZA |
| Color: | white-aluminum |
| Voltage range: | 24 V DC / ±15% / 0.5 A |
| Stroke length: | 350mm |
| Thrust: | 300N |
| Scope of delivery: | Drive, brackets are not included and must be ordered separately. |
| Dimensions: | see data sheet |
| Housing: | Aluminium / Polycarbonat |
| Speed: | 7,1mm/s |
| Speed open SHEV: | 8mm/s |
| Noise level: | LpA ≤ 70 dB(A) |
| Current / Power: | 0,5 A |
| Tensile force: | 300N |
Scope of delivery
Drive, brackets are not included and must be ordered separately.
Download Datenblatt ZA-0300-1-PLP (DE) 
