Nekos rack and pinion drive SKY 450 - 230V

Based on the SKY family, this design combines power and versatility in a machine with 450 N push and pull force. The supporting structure is made of high-strength composite material (polyamide with fiberglass filler), and the steel rack has a round cross-section. Thanks to the system with sliding tension clamp, the actuator can be fixed along the entire length of the rod, even at the head end. The bracket can be swiveled to adapt to the window rotation. SKY 450 can be used in the tandem version with a shaft for a second push point. Available strokes: 180, 230 mm for slats and blinds, 350, 550, 750, 1000 mm for window application.

Linear rack and pinion actuator for the movement of domes, top-hung and bottom-hung windows and hatches.

• Push and pull force 450 N. One or two pushing positions
• Operation with 230V AC (50 Hz) supply voltage
• Power consumption-controlled limit switch during opening and closing also functions as electronic overload protection
• Included in the delivery is the universal folding bracket, which can be fixed along the entire length of the rod by means of two sliding clamps
• Possibility for parallel connection

For other features, please refer to the technical data table.
Conforms to the relevant EU directives (EMC directives, low voltage directives).

Technical data

• Push and pull force: 450N
• Supply voltage: 230V AC
• Current consumption at rated load: 0.28A-0.19A
• Power consumption at rated load: 21.6-24W
• Thrust speed at idle: 6.7mm/s
• Stroke time at no-load: Depends on the stroke
• Electrical insulation: Class II
• Operating mode: 2 cycles
• Operating temperature: - 5 °C ... + 65°C
• Protection class: IP44
• Adjustment of the connection with the window frame: Electronic with adjustment by dip switch
• Parallel supply of two or more motors: Yes (max. 20)
• Tandem or group connection: Yes
• Nominal holding force (varies according to the selected brackets): 2200N
• Limit stop at opening: With power input
• Closing limit stop: With power consumption
• Overvoltage protection: With power consumption
• Length of power supply cable: 1m
• Abmessungen: 103x47x(Hub+135)mm