Product finder
Step by step to the right product

>> To our product consultants

Printable checklists
Send in and receive offer

>> To the checklists

7345
27.007.05

Stroke:

Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time

€461.72 *

incl. VAT plus shipping costs

Leave your email address and stay informed about this article.

as soon as the item is back in stock
as soon as the item drops in price
as soon as the item is available as a special offer
  ZA 105-K rack and pinion drive The ZA 105-K stands for the plus in performance and... more

 

ZA 105-K rack and pinion drive

The ZA 105-K stands for the plus in performance and robustness: This rack and pinion drive provides 1000 N push and pull force, which is directly controlled via 230 V voltage. This means that a significantly smaller cable cross-section is sufficient and simple installation is possible.

Performance features:

  • Can be used for openings for smoke ventilation, D+H Euro-SHEV according to DIN EN 12101-2 as well as for daily ventilation
  • Control directly via 230 V AC
  • Low power consumption due to high efficiency
  • Cable entry possible at top and bottom
  • Drive unit can be changed from left to right
  • Running speed in CLOSE direction reduced to 5 mm/s (passive closing edge protection)
  • Time-controlled reversing when an obstacle is detected in the CLOSE direction (active closing edge protection)

Thanks to the large selection of brackets, the rack and pinion drive can be mounted on both the main closing edge and the secondary closing edge 

On the secondary closing edge.

You will receive the drive with connecting cable, without mounting sets (please order separately). 

For space requirements for mounting and dimensions, please refer to the data sheet!

Painting in RAL please on request!

More detailed information such as data sheet, assembly instructions for the drive can be found under the tab "Downloads".

If you have any technical questions, please do not hesitate to contact our technical department at 09280/981119-15.

Photos, videos and diagrams: Source © D+H Mechatronik AG

 

Technical advice

+49 9282 48731-15
technik@bsc-technology.de

Fast delivery

... of goods in stock. Orders placed before 14:00 are usually shipped the same day.

Questions about the article

to the inquiry form

Technical data more
Made in : Germany
Voltage : 230V AC
RWA suitable : Ja, No
Application : For roof windows, Light domes
Stroke length can be shortened : No
Humidity : NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND
Signaling contact : No
Protection class : IP 65
Design : Rack and pinion drive
Limit switch Open - Close : Electronic load disconnection
Ambient temperature : -5 to +75°C
Connection line : 2.5 m silicone cable
Modell : ZA
Color: white-aluminum
Voltage range: 230 V AC / +10 % ... -15 % / 50 Hz
Stroke length: 350mm
Thrust: 1000N
Scope of delivery: Drive, brackets are not included and must be ordered separately.
Dimensions: see data sheet
Housing: Aluminium / Polycarbonat
Speed: 10mm/s
Noise level: LpA ≤ 70 dB(A)
Current / Power: 27 W / 30 VA
Tensile force: 1000N
Read, write and discuss reviews... more
Customer reviews for "D+H ZA 105-K rack and pinion drive"
Write rating
Reviews will be activated after verification.

The fields marked with * are required.

Last viewed