Delivery time 9 - 12 Working days
Important info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Additional locking device ZV-ELIMATIC-I is an additional electric locking device with handle square feed from the inside. It can be installed between the control and the drive system with a square pin directly on the window gear. The locking hinge of the window is operated by an electromechanical drive. The ZV-ELIMATIC-I can be used in SHEV and ventilation applications without any problems.
Individual setting options via DIP switch
Due to the low overall height of the ZV-ELIMATIC it requires only minimal space on the sash with an almost unlimited opening angle. The locking drive unlocks to an opening angle of 180° within 13 seconds.
Individual setting options via DIP switch to 90° or 180° or to left- or right-turning window gears allow versatile use of the locking device. The locking device can be used on inward-opening elements as well as on outward-opening windows.
Integrated working sequence controller for connection of 24 VDC drives
The integrated slave controller allows connection of 24 VDC drives with F feedback contact (total current 6 A). An additional module is thus no longer necessary.
Since only the window handle is replaced by the locking drive, windows can be built in accordance with resistance classes WK or RC. With the use of multipoint locks, a better tightness of the window is achieved.
Additional locking ZV-ELIMATIC at a glance:
- low space requirement (overall height only 43 mm)
- short opening times (unlocking to 180° within 13 seconds)
- versatile use
- better tightness
- integrated slave controller for connection of 24 VDC drives with F-feedback contact (total current 6 A)
- visually appealing, flat design
- internal cable routing possible
- Rotation left/right - 90°/180° adjustable by DIP switch
- Input voltage 24 V DC
- Rated current 0.95 A
- Protection class IP32
- Duty cycle 30
- Mounting type surface mounted
- Weight 0.9 kg
- Housing aluminum E6/EV1, anodized
- Housing type sheet steel
- Housing length 266 mm
- Housing width 51 mm
- Housing height 43 mm
- Protection class III
- Nominal operating temperature 20 °C
- Ambient temperature range -5 °C - 75 °C
|Made in :||Germany|
|Stroke length can be shortened :||No|
|Voltage :||24 V DC|
|Protection class :||III|
|Protection class :||IP 32|
|Ambient temperature :||-5 °C ... +75 °C|
|Design :||Locking drive|
|Color:||Aluminum E6/EV1, anodized|
|Scope of delivery:||Interlock|
|Dimensions:||Housing length 266 mm; housing width 51 mm; housing height 43 mm|
Scope of delivery