Aumüller folding arm drive FTA 600 R
Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
- Other type designation: Eltral TA 60
FOLDING LEVER ACTUATOR - FTA600 R S12 24V DC
VARIANT: R - with roller, hinged lever opens free-flowing doors to 90° via the roller
Folding lever actuators from AUMÜLLER consist of an attractive, rectangular aluminum housing and a lever arm mounted on the side. The lever arm is approximately as long as the housing. When closed, it rests against the housing. Its opening angle is approx. 93°. The opening time is approx. 45 seconds. The microprocessor-controlled switch-off electronics and the motor gear unit are housed in the actuator housing.
Thanks to the integrated microprocessor and travel detection system, the main drive parameters, such as opening angle, speed, force, synchronous operation or sequential operations, can be programmed for specific objects. Soft start and soft stop protect the sash and mounting elements from premature wear. The integrated contact can be programmed for feedback or signal forwarding.
The flap lever drives were developed for installation on secondary closing edges of side-hung windows. However, they are also used on doors that are opened automatically in the event of a fire to allow fresh air to flow in, but can still be operated freely via the handle in normal operation. The opening angle of the side-hung sashes or doors is determined by the distance between the pivot points of the lever arm and the hinges. When used on doors as a secondary opening, the potential-free contact in the window drive is used to control an electric door opener or a deadbolt lock.
Various installation-friendly accessories are available for convenient mounting.
Area of application:
You can use AUMÜLLER flap lever actuators in SHEV systems and for natural ventilation via automated windows, mainly in facades.
Due to their slim design, they protrude only slightly into the room. They achieve an opening angle of approx. 90° in about 45 seconds.
The window openers are mounted resting on the blind or casement frame of the secondary closing edges.
They are used for inward or outward opening side-hung windows. However, they can also be mounted on doors that open automatically in the event of a fire to allow fresh air to flow in and can be operated freely via the handle in normal operation.
Thanks to microprocessor-controlled load disconnection electronics, synchronous operation in drive systems or sequential control with interlocking drives is possible without additional modules as well as object-specific programming.
Our customers are happy to install this drive on basement hatches: www.windowdrives.com/finder-kellerluke
Window and facade manufacturers are enthusiastic users of hinged lever drives.
You will receive the drive without mounting material (sold separately).
Photos, videos and diagrams: Source © Aumüller Automatic GmbH
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Made in : | Germany |
Stroke length can be shortened : | Ex works - on request |
Signaling contact : | No |
Application : | For basement hatches, For doors (as smoke ventilation or RWA supply air) |
Voltage : | 24 V DC |
RWA suitable : | Ja |
Protection class : | IP 32 |
Operating mode : | 30 % (ON: 3 min. / OFF: 7 min.) |
Ambient temperature : | -5 °C ... +75 °C |
Design : | Folding arm drive |
Modell : | FTA |
Connection line : | AUMÜLLER-Click plug; halogen-free, gray 5x0.5 mm², length 3 m |
Voltage range: | 24V DC (± 20%), max. 2 Vpp |
Thrust: | 600N |
Scope of delivery: | Drive without console |
Dimensions: | 40 x 56 x 421 mm, adjustment mechanism lever 20 x 30 x 380 mm |
Housing: | Aluminium |
Speed: | 2.0 degrees/s (45 s for 90°) |
Current / Power: | 1,0A |
Tensile force: | 200N |
Scope of delivery
Drive without console