Aumüller chain drive KS2 24V S12 with Z-contact

Chain drive KS2 Z-version 24V with integrated S12 - load disconnection electronics

Safety in the smallest space

With a force of 250N and a compact drive size that allows profile-integrated mounting, KS2 chain drives are ideally suited for safe opening and closing of windows.

Highlights of the KS2

• electronic speed control for smooth motor running and low noise level
• Housing made of natural anodized aluminum, RAL9016 or optionally in other RAL colors (see below - bundle articles)
• Suitable for surface and profile integrated installation
• Rigid drive mounting on frame possible without brackets
• Universal brackets and sash brackets for all commercially available profile systems
• Side bow chain made of high-quality stainless steel for large opening angles with smallest bending radii
• Chain retracts completely into the housing to facilitate profile-integrated assembly
• Z-version with programmable feedback of end positions "OPEN" or "CLOSED

Programmable parameters of the intelligent S12 load disconnection electronics:

• Synchronized multiple operation of up to 4 NC and 2 - interlock drives in sequence control- Soft start and soft stop in the end positions
• Stroke length, closing force, speed
• Reversing of the running direction in case of overload cut-off during the closing process
• M-COM for automatic configuration of synchronous operation and sequence control with interlocking drives (S3/S12 SW V2) in drive systems (M-COM available separately, part no. 2682)

Mounting of the KS2:

Due to their slim design, chain actuators from AUMÜLLER lie flat against the window profiles and do not protrude into the room. You can use the 24 V DC version in SHE systems and for natural ventilation via automated windows. The window openers are mounted either on the surface or integrated in the profile. Preferred mounting locations are blind or sash frames of the main or secondary closing edges. The range of applications includes inward- or outward-opening side-hung, bottom-hung, top-hung or parallel opening windows. Thanks to microprocessor-controlled load cut-off electronics, synchronous operation in drive systems as well as sequential control with locking drives or object-specific special solutions are also possible without additional modules.

Variants of the KS2:

• R - Right version
• L - Left version
• Z - Version with programmable feedback contact "OPEN" or "CLOSED" (max. 24V / 0.5A)

You will receive the actuator without mounting material (available separately).