WindowMaster chain drive WMX 804-1
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Application range
- suitable for surface mounting
- can be used for SHE and comfort ventilation
- can be used for all opening types
- control via ±24V control units or bus-capable MotorControllers with MotorLink™ technology
- can be coupled with a WMB interlock drive
- external terminal strip can be connected directly to the motor
- synchronization of up to four window drives - no external synchronization module required no external synchronization module necessary
- exact digital position feedback as well as possible programming of three different speeds in connection with MotorLink™ controls
- soft close function
- a reprogramming of push force, Speed and reversing can be done at any time with WindowMaster programmer WAT 100
- built-in electronic load cut-off/end cut-off
- motor electronics with microcontroller
- the actuator reverses to the ideal position of the window to increase the lifetime of the window seal
- easy mounting
Actuator variants
There are four variants of the actuator:
Single drive (-1), Synchro drive (-2), Trial drive (-3) and Quattro drive (-4). The synchro drives (-2, -3 and -4) have a built-in patented synchronization function, which ensures that the drives can communicate directly with each other without additional modules and even coordinate speed and position. On larger windows up to 4 drives can be installed without additional synchronization module.
Offered here is the single drive. If other variants are required, please contact us.
Reduction of the risk of jamming
The drive is programmed to stop and reverse in the event of resistance during the closing process. Reprogramming can be carried out at any time even after installation has been completed.
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Made in : | Germany |
Stroke length can be shortened : | No |
Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
Signaling contact : | No |
Application : | Pivot window, Tilt window, Top hung window |
Voltage : | 24 V DC |
RWA suitable : | Ja |
Design : | Chain drive |
Protection class : | IP 20 |
Limit switch Open - Close : | Electronic |
Holding force : | 3000N |
Ambient temperature : | -5°C - +74°C, max. 90% relative humidity (non-condensing) |
Modell : | WMX |
Connection line : | 2m connection cable 3-wire 0.34 mm² |
Color: | Gray |
Voltage range: | 20-36 VDC |
Stroke length: | 250mm |
Thrust: | 100N |
Scope of delivery: | Drive with 2m connection cable with connection plugs |
Dimensions: | 332x29x42mm |
Housing: | Zinc |
Speed: | 7.5mm/s |
Current / Power: | max. 1A |
Tensile force: | 150N |
Scope of delivery
Drive with 2m connection cable with connection plugs