effeff - ASSA ABLOY security lock motor multipoint locking 529X200PZ-----1

effeff - ASSA ABLOY security lock motor multi-point locking 529X200PZ-----1

• The motor multipoint lock is used primarily where the advantage of motorized unlocking must be combined with mechanical security requirements. The integrated monitoring contacts allow essential lock states to be interrogated.
• Connection via motorized lock control unit 509XSTRG

Advantages at a glance

• Mechanical self-locking
• With cross latch, therefore convertible for DIN L / DIN R doors
• Mechanical sequence control of self-locking between cross latch and control latch
• Burglar-resistant due to solid deadbolt with 20 mm exclusion. Additional stable hook bolts for increased burglary protection. The hook bolts are not used to press the door seals. The system works reliably only without lateral pressure on the bolts.
• Burglar resistance up to class WK2 achievable in suitable door systems
• Panic function - Approval according to EN 179 - Approval according to EN 1125
• Suitable for fire doors
• Motorized unlocking, therefore perfectly suitable for combination with door automation systems
• Use with interchangeable fitting
• Change function for unlocking via key from the outside
• Monitoring functions

Note

• Please note: Connection cable must be ordered separately.
• Maximum cable length 10 m

Technical data

• Load capacity relay outputs: 24 V DC: 800 mA
• Rated operating voltage: 12 - 24 V DC, stable. (-10% / +15%) / 12-18 V AC
• Current consumption inrush current 12 V DC: 1300 mA
• Current consumption inrush current 24 V DC: 600 mA
• Current consumption with control motor operation 12 V DC: 450 mA
• Current consumption with control motor operation 24 V DC: 220 mA
• Current consumption with control unit quiescent operation 12 V DC: 80 mA
• Current consumption with control in quiescent mode 24 V DC: 40 mA
• Connection: Via motor lock control unit 509XSTRG
• Forend type: U-forend
• DIN direction: Universal
• Version: Euro profile cylinder
• Approval DIN EN 179: Certificate of performance resistance 0432-CPR-00007-11
• Mech. Strength (EN 12209:2004): 200.000 cycles, 50N latch load, protection class 6
• Bolt exclusion: 20 mm
• Dimension (control WxHxD): 192 x 110 x 45 mm
• Backset: 35 mm
• Approval DIN EN 1125: Certificate of performance resistance 0432-CPR-00007-12
• Distance: 92 mm
• Maximum cable length 10 m
• Scope of delivery: 1 piece motor multiple locking device, 1 piece operating instructions, without connection cable