Complete set RWA with spindle drive M2 for skylight domes from size 120 x 120cm, for Essmann skylight dome

This complete set RWA with spindle drive M2 for skylight domes from size 120 x 120cm, contains a STG Beikirch spindle drive M2 with 500mm stroke, a matching bracket and a sash bracket for Essmann skylight domes.

With these parts you equip an Essmann skylight dome with a SHEV spindle drive. This drive fits from a size of the skylight dome of 120cm x 120cm, measured at the lower (wider) end of the upstand.

The bracket included in the set fits exactly on the fitting plate of Essmann skylight domes, so you do not need to drill any additional holes in the upstand and screw the bracket in place with the screws included in the delivery. After mounting the sash bracket on the skylight dome top section, hang the drive in the retracted position in the sash bracket and then tighten the screws of the drive bracket. This sets the pivot point. You can make a fine adjustment by turning the eyebolt of the spindle in or out a little. Please do not forget to tighten the lock nut again.

This drive can be connected to all current SHEV control panels, provided that they can supply a current of at least 1A at an output, and switches off automatically by means of an integrated load cut-off.

With a skylight dome 120/120 and this drive, you can achieve 1m² of geometric smoke extraction area.