Product finder
Step by step to the right product

>> To our product consultants

Printable checklists
Send in and receive offer

>> To the checklists

Tilting window up to 150mm

Equip your turn / tilt window with a chain drive. The window handle always remains in tilted position, the drive reliably keeps the window closed. To fully open the window, simply disconnect the chain from the wing pedestal (by removing the split pin or screw).
Tilting window up to 150mm

1 Please enter the sash height in [cm]:

The minimum height is 25cm, maximum 200cm are possible. The lower the wing, the less options we have when choosing a suitable drive.
More info / instruction

Please enter the sash height in [cm]:

The minimum height is 25cm, maximum 200cm are possible. The lower the wing, the less options we have when choosing a suitable drive.

2 Please enter the wing width in [cm]:

Here a minimum of 37cm and a maximum of 125cm are possible. If your window is wider, you need a tandem drive. Please contact us in this case. We need this information to find a drive small enough to fit your window.
More info / instruction

Please enter the wing width in [cm]:

Here a minimum of 37cm and a maximum of 125cm are possible. If your window is wider, you need a tandem drive. Please contact us in this case. We need this information to find a drive small enough to fit your window.

3 Please enter the flashover thickness in [mm]:

This affects the console set and whether the window closes properly.
More info / instruction

Please enter the flashover thickness in [mm]:

This affects the console set and whether the window closes properly.

4 Please enter the available space on the frame in [mm]:

At this point, the drive is attached. The different chain drives are different "thick" and we have to make sure that the drive can be mounted.
More info / instruction

Please enter the available space on the frame in [mm]:

At this point, the drive is attached. The different chain drives are different "thick" and we have to make sure that the drive can be mounted.